当前位置： 首页 > news >正文

上传文章的网站省委副书记

news 2025/7/28 16:56:53
上传文章的网站,省委副书记,正规专业的网站建设公,广告图片网站源码Excel制作 新建一个Excel，后缀为“.xls” 工作本名称改为“CAN_Matrix” 在首行按照列来起名字，在里面只需要填写必须的内容即可。 列数名称第0列Message Name第1列Message Format第2列Message ID第3列Message Length (byte)第4列Message Transmitte…

Excel制作

新建一个Excel，后缀为“.xls”

工作本名称改为“CAN_Matrix”

在首行按照列来起名字，在里面只需要填写必须的内容即可。

列数名称
第0列Message Name
第1列Message Format
第2列Message
ID
第3列Message
Length
(byte)
第4列Message Transmitter
ECU
第5列Message Receiver
ECU
第6列Message Send Method
第7列Message Cycle Period(ms)
第8列Message Cycle Period Fast(ms)
第9列Message Delay Time(ms)
第10列Message IL Support 
第11列Message Num Of Repetition
第12列Message Start Delay Time(ms)
第13列NM Message
第14列CANFD BRS
第15列Message Comment
第16列Signal Name
第17列Signal
Length
(Bit)
第18列Signal Start Bit
第19列Singal Byte
Order
第20列Signal Unit
第21列Signal Data Type
第22列Signal Resolution
第23列Signal OffSet
第24列Signal Min
Value
第25列Signal Max Value
第26列Singal Inactive Value
第27列Singal Send Method
第28列Singal Start Value
第29列NWM- Wakeup Allowed
第30列Signal Value Descriptions
第31列Signal Comment

代码源码

# encoding='utf-8'
import xlrd
from decimal import Decimalimport sys
global Table        #表格
global RowCount     #行数
global ColumnCount  #列数
global OutputFile   #输出文件ExcelTable = "CAN_Matrix"   #表格
Note = "xin1"               #节点名称MessageName_Position = 0 #报文名称序号
MessageFormat_Position = 1 #报文格式序号
MessageID_Position = 2 #报文ID序号
MessageLength_Position = 3 #报文长度序号
MessageTransmitterNote_Position = 4 #报文发送节点序号
MessageReceiverNote_Position = 5 #报文接收节点序号
MessageSendMethod_Position  = 6 #报文发送方式序号
MessagePeriod_Position = 7 #报文周期序号
MessagePeriodFast_Position = 8 #报文快速周期序号
MessageDelayTime_Position = 9 #报文延迟时间序号
MessageILSupport_Position = 10 #报文支持IL序号
MessageNumOfRepetition_Position = 11 #报文重发次数序号
MessageStartDelayTime_Position = 12 #报文开始延迟时间序号
MessageNM_Position = 13 #报文网络管理序号
MessageCANFDBRS_Position = 14 #报文CANFDBRS序号
MessageComment_Position = 15 #报文注释序号SignalName_Position = 16 #信号名称序号
SignalStartLength_Position = 17 #信号长度序号
SignalStartBit_Position = 18 #信号起始位序号
SignalByteOrder_Position = 19 #信号字节序序号
SignalUnit_Position = 20 #信号单位序号
SignalDataType_Position = 21 #信号数据类型序号
SignalResolution_Position = 22 #信号比率序号
SignalOffset_Position = 23 #信号偏移序号
SignalMinValue_Position = 24 #信号最小值序号
SignalMaxValue_Position = 25 #信号最大值序号
SingalInactiveValue_Position = 26 #信号未激活值序号
SingalSendMethod_Position = 27 #信号发送方式序号
SingalStartValue_Position = 28 #信号开始值序号
SingalNWMWakeupAllowed_Position = 29 #信号网管唤醒序号
SignalValueDescriptions_Position = 30 #信号数值描述序号
SignalComment_Position = 31 #信号标注序号def remove_exponent(num):  # 去掉读取到的数值的小数点后边的0return num.to_integral() if num == num.to_integral() else num.normalize()def Read_Base_Infomation(): # 获取基本信息global Table        #表格global RowCount     #行数global ColumnCount  #列数global OutputFile   #输出文件if len(sys.argv) > 1:InputFilePath = sys.argv[1]else:InputFilePath = "DBCDemo.xls"#print(f"InputFilePath:{InputFilePath}\n")LastIndex = InputFilePath.rfind('\\')StartIndex = InputFilePath.find('.xls', LastIndex)InputFileSuffix = InputFilePath[LastIndex + 1:]#print(f"InputFileSuffix:{InputFileSuffix}\n")Xlsx = xlrd.open_workbook(InputFileSuffix)    # 找到输入文件Table = Xlsx.sheet_by_name(ExcelTable)  # 找到sheetRowCount = Table.nrows                  # 提取行数ColumnCount = Table.ncols               # 提取列数InputFileNoSuffix = InputFilePath[LastIndex + 1:StartIndex - 3]#输出文件#print(f"InputFileNoSuffix:{InputFileNoSuffix}\n")OutputFile = InputFileNoSuffix + ".dbc"#print(f"OutputFile:{OutputFile}\n")def Output_DBC_Head():#打印文件头部global OutputFile   #输出文件with open(OutputFile, "w",encoding="utf-8") as f:f.write("VERSION \"\"")f.write("\n\n")f.write('''
NS_ : NS_DESC_CM_BA_DEF_BA_VAL_CAT_DEF_CAT_FILTERBA_DEF_DEF_EV_DATA_ENVVAR_DATA_SGTYPE_SGTYPE_VAL_BA_DEF_SGTYPE_BA_SGTYPE_SIG_TYPE_REF_VAL_TABLE_SIG_GROUP_SIG_VALTYPE_SIGTYPE_VALTYPE_BO_TX_BU_BA_DEF_REL_BA_REL_BA_DEF_DEF_REL_BU_SG_REL_BU_EV_REL_BU_BO_REL_SG_MUL_VAL_BS_:\n\n''')f.write(f"BU_: {Note}\n\n\n")def Output_MessageMappingSignal():#报文和信号映射关系global Table        #表格global RowCount     #行数global OutputFile   #输出文件with open(OutputFile, "a+",encoding="utf-8") as f:i = 1 #跳过表头while i < RowCount:#逐行轮询MessageName = Table.cell_value(i, MessageName_Position)# 报文名称if MessageName == "":   # 本行为空print(f"Empty Message exists\n")returnelse:                   # 本行有内容#MessageID = Table.cell_value(i, MessageID_Position)MessageID = int((Table.cell_value(i, MessageID_Position)), 16)# 报文ID十六进制#print(f"MessageID:{MessageID}\n")MessageLength = remove_exponent(Decimal(Table.cell_value(i, MessageLength_Position)).quantize(Decimal("0")))# 报文长度MessageTransmitterNote = Table.cell_value(i, MessageTransmitterNote_Position)# 报文发送节点MessageReceiverNote = Table.cell_value(i, MessageReceiverNote_Position)# 报文接收节点if MessageTransmitterNote == Note :# 写入报文ID信息f.write(f"BO_ {MessageID} {MessageName}: {MessageLength} {Note}\n")  else:f.write(f"BO_ {MessageID} {MessageName}: {MessageLength} Vector__XXX\n")               while 1:#扫描这个报文里面的所有信号if (i == RowCount) or (MessageID != int((Table.cell_value(i, MessageID_Position)), 16)):#后面没有该报文的信号或者已经到尽头f.write("\n")breakelse:# 后面还有该报文的信号SingleName = Table.cell_value(i, SignalName_Position)#信号名称#print(f"SingleName:{SingleName}\n")SignalStartBit = remove_exponent(Decimal(Table.cell_value(i, SignalStartBit_Position)).quantize(Decimal("0")))#信号起始位，去除小数点后边的0以及保留小数点后O位#print(f"SignalStartBit:{SignalStartBit}\n")SignalLength = remove_exponent(Decimal(Table.cell_value(i, SignalStartLength_Position)).quantize(Decimal("0"))) #信号长度#print(f"SignalLength:{SignalLength}\n")if Table.cell_value(i, SignalByteOrder_Position) == "Motorola MSB" or Table.cell_value(i, SignalByteOrder_Position) == "Motorola" or Table.cell_value(i, SignalByteOrder_Position) == "":#信号字节序SignalByteOrder = "@0"else:SignalByteOrder = "@1"#print(f"SignalByteOrder:{SignalByteOrder}\n")if Table.cell_value(i, SignalDataType_Position) == "Unsigned" or Table.cell_value(i, SignalDataType_Position) == "unsigned" or Table.cell_value(i, SignalDataType_Position) == "":#信号有无符号SignalDateType = "+"else:SignalDateType = "-"#print(f"SignalDateType:{SignalDateType}\n")if Table.cell_value(i, SignalUnit_Position) == "":#信号单位SignalUnit = ""else:SignalUnit = Table.cell_value(i, SignalUnit_Position)#print(f"SignalUnit:{SignalUnit}\n")if Table.cell_value(i, SignalResolution_Position) == "":#信号精度SignalResolution = 1else:SignalResolution = remove_exponent(Decimal(Table.cell_value(i, SignalResolution_Position)).quantize(Decimal("0.00000")))if Table.cell_value(i, SignalOffset_Position) == "":#信号偏移SignalOffset = 0else:SignalOffset = remove_exponent(Decimal(Table.cell_value(i, SignalOffset_Position)).quantize(Decimal("0.00000")))#print(f"SignalOffset:{SignalOffset}\n")                         if Table.cell_value(i, SignalOffset_Position) == "":SignalMinValue = 0;else:HexValue = str(Table.cell_value(i, SignalMinValue_Position))#信号最小值if HexValue.startswith('0x') or HexValue.startswith('0X'):SignalMinValue = int(HexValue, 16)  # 将字符串转换为10进制整数else:SignalMinValue = remove_exponent(Decimal(Table.cell_value(i, SignalMinValue_Position)).quantize(Decimal("0")))#print(f"SignalMinValue:{SignalMinValue}\n") if Table.cell_value(i, SignalMaxValue_Position) == "":SignalMaxValue = 0xFF;else:           HexValue = str(Table.cell_value(i, SignalMaxValue_Position))#信号最大值if HexValue.startswith('0x') or HexValue.startswith('0X'):SignalMaxValue = int(HexValue, 16)  # 将字符串转换为10进制整数else:SignalMaxValue = remove_exponent(Decimal(Table.cell_value(i, SignalMaxValue_Position)).quantize(Decimal("0")))        #print(f"SignalMaxValue:{SignalMaxValue}\n") if MessageTransmitterNote == Note :f.write(f" SG_ {SingleName} : {SignalStartBit}|{SignalLength}{SignalByteOrder}{SignalDateType} ({SignalResolution},{SignalOffset}) [{SignalMinValue}|{SignalMaxValue}] \"{SignalUnit}\" Vector__XXX\n")else :f.write(f" SG_ {SingleName} : {SignalStartBit}|{SignalLength}{SignalByteOrder}{SignalDateType} ({SignalResolution},{SignalOffset}) [{SignalMinValue}|{SignalMaxValue}] \"{SignalUnit}\" {Note} \n")    i = i + 1 #扫描下一行#print(f"i:{i}\n")f.write("\n")def Output_DBC_Comment(): global Noteglobal OutputFile   #输出文件with open(OutputFile, "a+", encoding="GB2312") as f:     f.write("""
BA_DEF_ SG_  "GenSigStartValue" FLOAT 0 100000000000;
BA_DEF_ SG_  "GenSigSendType" ENUM  "Cyclic","OnWrite","OnWriteWithRepetition","OnChange","OnChangeWithRepetition","IfActive","IfActiveWithRepetition","NoSigSendType","NotUsed","NotUsed","NotUsed","NotUsed","NotUsed";
BA_DEF_ SG_  "GenSigInactiveValue" INT 0 100000;
BA_DEF_ SG_  "NWM-WakeupAllowed" ENUM  "No","Yes";
BA_DEF_ BO_  "GenMsgSendType" ENUM  "Cyclic","NotUsed","NotUsed","NotUsed","NotUsed","Cyclic","NotUsed","IfActive","NoMsgSendType","NotUsed","vector_leerstring";
BA_DEF_ BO_  "GenMsgNrOfRepetition" INT 0 999999;
BA_DEF_ BO_  "GenMsgDelayTime" INT 0 1000;
BA_DEF_ BO_  "GenMsgCycleTime" INT 0 50000;
BA_DEF_ BO_  "GenMsgCycleTimeFast" INT 0 50000;
BA_DEF_ BO_  "GenMsgILSupport" ENUM  "No","Yes";
BA_DEF_ BO_  "NmMessage" ENUM  "no","yes";
BA_DEF_ BO_  "GenMsgStartDelayTime" INT 0 65535;
BA_DEF_ BU_  "NmStationAddress" INT 0 63;
BA_DEF_ BU_  "NmNode" ENUM  "no","yes";
BA_DEF_  "NmBaseAddress" HEX 1024 1087;
BA_DEF_ BO_  "CANFD_BRS" ENUM  "0","1";
BA_DEF_  "DBName" STRING ;
BA_DEF_  "BusType" STRING ;
BA_DEF_ BU_  "NodeLayerModules" STRING ;
BA_DEF_ BU_  "ECU" STRING ;
BA_DEF_ BU_  "CANoeJitterMax" INT 0 0;
BA_DEF_ BU_  "CANoeJitterMin" INT 0 0;
BA_DEF_ BU_  "CANoeDrift" INT 0 0;
BA_DEF_ BU_  "CANoeStartDelay" INT 0 0;
BA_DEF_ BO_  "VFrameFormat" ENUM  "StandardCAN","ExtendedCAN","reserved","reserved","reserved","reserved","reserved","reserved","reserved","reserved","reserved","reserved","reserved","reserved","StandardCAN_FD","ExtendedCAN_FD";
BA_DEF_DEF_  "GenSigStartValue" 0;
BA_DEF_DEF_  "GenSigSendType" "Cyclic";
BA_DEF_DEF_  "GenSigInactiveValue" 0;
BA_DEF_DEF_  "NWM-WakeupAllowed" "";
BA_DEF_DEF_  "GenMsgSendType" "NoMsgSendType";
BA_DEF_DEF_  "GenMsgNrOfRepetition" 0;
BA_DEF_DEF_  "GenMsgDelayTime" 0;
BA_DEF_DEF_  "GenMsgCycleTime" 0;
BA_DEF_DEF_  "GenMsgCycleTimeFast" 0;
BA_DEF_DEF_  "GenMsgILSupport" "Yes";
BA_DEF_DEF_  "NmMessage" "no";
BA_DEF_DEF_  "GenMsgStartDelayTime" 0;
BA_DEF_DEF_  "NmStationAddress" 0;
BA_DEF_DEF_  "NmNode" "no";
BA_DEF_DEF_  "NmBaseAddress" 1024;
BA_DEF_DEF_  "CANFD_BRS" "1";
BA_DEF_DEF_  "DBName" "";
BA_DEF_DEF_  "BusType" "";
BA_DEF_DEF_  "NodeLayerModules" "";
BA_DEF_DEF_  "ECU" "";
BA_DEF_DEF_  "CANoeJitterMax" 0;
BA_DEF_DEF_  "CANoeJitterMin" 0;
BA_DEF_DEF_  "CANoeDrift" 0;
BA_DEF_DEF_  "CANoeStartDelay" 0;
BA_DEF_DEF_  "VFrameFormat" "StandardCAN";
BA_ "BusType" "CAN FD";
""")f.write(f'BA_ "DBName" \"{Note}\";\n\n')def Output_SignalAttributes():#添加信号属性global Table        #表格global RowCount     #行数global OutputFile   #输出文件with open(OutputFile, "a+", encoding="utf-8") as f:#with open(OutputFile, "a+", encoding="GB2312") as f:  i = 1 #跳过表头while i < RowCount:#逐行轮询SingleName = Table.cell_value(i, SignalName_Position)#信号名称#print(f"SingleName:{SingleName}\n")MessageID = int((Table.cell_value(i, MessageID_Position)), 16)# 报文ID十六进制if Table.cell_value(i, SingalInactiveValue_Position) != "":#信号未激活值SingalInactiveValue = remove_exponent(Decimal(Table.cell_value(i, SingalInactiveValue_Position)).quantize(Decimal("0")))#print(f"SingalInactiveValue:{SingalInactiveValue}\n")f.write(f"BA_ \"GenSigInactiveValue\" SG_ {MessageID} {SingleName} {SingalInactiveValue};\n")if Table.cell_value(i, SingalSendMethod_Position) != "":#信号发送方式SingalSendMethod = Table.cell_value(i, SingalSendMethod_Position)#print(f"SingalSendMethod:{SingalSendMethod}\n")if SingalSendMethod == "Cyclic":f.write(f"BA_ \"GenSigSendType\" SG_ {MessageID} {SingleName} 0;\n")elif SingalSendMethod == "OnWrite":f.write(f"BA_ \"GenSigSendType\" SG_ {MessageID} {SingleName} 1;\n")elif SingalSendMethod == "OnWriteWithRepetition":f.write(f"BA_ \"GenSigSendType\" SG_ {MessageID} {SingleName} 2;\n")              elif SingalSendMethod == "OnChange":f.write(f"BA_ \"GenSigSendType\" SG_ {MessageID} {SingleName} 3;\n")elif SingalSendMethod == "OnChangeWithRepetition":f.write(f"BA_ \"GenSigSendType\" SG_ {MessageID} {SingleName} 4;\n")elif SingalSendMethod == "IfActive":f.write(f"BA_ \"GenSigSendType\" SG_ {MessageID} {SingleName} 5;\n")elif SingalSendMethod == "IfActiveWithRepetition":f.write(f"BA_ \"GenSigSendType\" SG_ {MessageID} {SingleName} 6;\n")else:f.write(f"BA_ \"GenSigSendType\" SG_ {MessageID} {SingleName} 0;\n")if Table.cell_value(i, SingalStartValue_Position) != "":#信号开始值SingalStartValue = remove_exponent(Decimal(Table.cell_value(i, SingalStartValue_Position)).quantize(Decimal("0")))#print(f"SingalStartValue:{SingalStartValue}\n")f.write(f"BA_ \"GenSigStartValue\" SG_ {MessageID} {SingleName} {SingalStartValue};\n")if Table.cell_value(i, SingalNWMWakeupAllowed_Position) != "":#信号网管唤醒序号SingalNWMWakeupAllowed = Table.cell_value(i, SingalNWMWakeupAllowed_Position)#print(f"SingalNWMWakeupAllowed:{SingalNWMWakeupAllowed}\n")if SingalNWMWakeupAllowed == "Yes" or SingalNWMWakeupAllowed == "YES":f.write(f"BA_ \"NWM-WakeupAllowed\" SG_ {MessageID} {SingleName} 1;\n")else:f.write(f"BA_ \"NWM-WakeupAllowed\" SG_ {MessageID} {SingleName} 0;\n")              i = i + 1def Output_SignalValue():#打印信号值定义global RowCount     #行数global Table global OutputFile   #输出文件with open(OutputFile, "a+", encoding="utf-8") as f:i = 1 #跳过表头while i < RowCount:#逐行轮询if Table.cell_value(i, SignalName_Position) != "":MessageID = int((Table.cell_value(i, MessageID_Position)), 16)if Table.cell_value(i, SignalValueDescriptions_Position) != "":SingleName = Table.cell_value(i, SignalName_Position)SignalValueDescription = Table.cell_value(i, SignalValueDescriptions_Position).strip().replace("\r", "").split("\n")SignalValueDescription = list(reversed(SignalValueDescription))if SignalValueDescription != [""]:#处理列表元素使其生成DBC文件格式中一样的格式ELE = "\" ".join(SignalValueDescription).replace("0x","").replace(":"," \"")+"\""f.write(f"VAL_ {MessageID} {SingleName} {ELE} ;\n") i = i + 1      def Output_SignalComment():#添加信号注释global Table        #表格global RowCount     #行数global OutputFile   #输出文件with open(OutputFile, "a+", encoding="utf-8") as f:#信号注释，不提倡添加中文注释#with open(OutputFile, "a+", encoding="GB2312") as f:  i = 1 #跳过表头while i < RowCount:#逐行轮询if Table.cell_value(i, SignalName_Position) != "":MessageID = int((Table.cell_value(i, MessageID_Position)), 16)if Table.cell_value(i, SignalValueDescriptions_Position) != "":SingleName = Table.cell_value(i, SignalName_Position)if Table.cell_value(i, SignalComment_Position) != "":#信号标注序号SignalComment = Table.cell_value(i, SignalComment_Position).strip().replace("\n", "").replace("\r", "")f.write(f"CM_ SG_ {MessageID} {SingleName} \"{SignalComment}\";\n")i = i + 1def Output_MessageAttribute():#打印报文属性global RowCount     #行数global Tableglobal OutputFile   #输出文件with open(OutputFile, "a+",encoding="utf-8") as f:i = 1 #跳过表头while i < RowCount:#逐行轮询MessageID = int((Table.cell_value(i, MessageID_Position)), 16)# 报文IDif Table.cell_value(i, MessageFormat_Position) != "":# 报文格式MessageFormat = Table.cell_value(i, MessageFormat_Position)#print(f"MessageFormat:{MessageFormat}\n")if MessageFormat == "CAN Standard":  f.write(f"BA_ \"VFrameFormat\" BO_ {MessageID} 0;\n")elif MessageFormat == "CAN Extended":               f.write(f"BA_ \"VFrameFormat\" BO_ {MessageID} 1;\n") elif MessageFormat == "CAN FD Standard":              f.write(f"BA_ \"VFrameFormat\" BO_ {MessageID} 14;\n")                      elif MessageFormat == "CAN FD Extended":              f.write(f"BA_ \"VFrameFormat\" BO_ {MessageID} 15;\n")           else:              f.write(f"BA_ \"VFrameFormat\" BO_ {MessageID} 0;\n")  if Table.cell_value(i, MessageSendMethod_Position) != "":# 报文发送方式MessageSendMethod = Table.cell_value(i, MessageSendMethod_Position)#print(f"MessageSendMethod:{MessageSendMethod}\n")if MessageSendMethod == "Cyclic":f.write(f"BA_ \"GenMsgSendType\" BO_ {MessageID} 0;\n")   elif MessageSendMethod == "IfActive":           f.write(f"BA_ \"GenMsgSendType\" BO_ {MessageID} 7;\n")     else:f.write(f"BA_ \"GenMsgSendType\" BO_ {MessageID} 0;\n")     if Table.cell_value(i, MessagePeriod_Position) != "":            MessagePeriod = Table.cell_value(i, MessagePeriod_Position)if MessagePeriod != "Event":# 报文周期      MessagePeriod = remove_exponent(Decimal(Table.cell_value(i, MessagePeriod_Position)).quantize(Decimal("0")))                #print(f"MessagePeriod:{MessagePeriod}\n")f.write(f"BA_ \"GenMsgCycleTime\" BO_ {MessageID} {MessagePeriod};\n") if Table.cell_value(i, MessagePeriodFast_Position) != "":#报文快速周期 MessagePeriodFast = remove_exponent(Decimal(Table.cell_value(i, MessagePeriodFast_Position)).quantize(Decimal("0")))         f.write(f"BA_ \"GenMsgCycleTimeFast\" BO_ {MessageID} {MessagePeriodFast};\n") if Table.cell_value(i, MessageDelayTime_Position) != "":#报文延迟时间MessageDelayTime = remove_exponent(Decimal(Table.cell_value(i, MessageDelayTime_Position)).quantize(Decimal("0")))            f.write(f"BA_ \"GenMsgDelayTime\" BO_ {MessageID} {MessageDelayTime};\n")  if Table.cell_value(i, MessageILSupport_Position) != "":#报文支持IL序号MessageILSupport = Table.cell_value(i, MessageILSupport_Position)if MessageILSupport == "Yes" or MessageILSupport == "YES":f.write(f"BA_ \"GenMsgILSupport\" BO_ {MessageID} 1;\n") else:f.write(f"BA_ \"GenMsgILSupport\" BO_ {MessageID} 0;\n")    if Table.cell_value(i, MessageNumOfRepetition_Position) != "":#报文重发次数MessageNumOfRepetition = remove_exponent(Decimal(Table.cell_value(i, MessageNumOfRepetition_Position)).quantize(Decimal("0")))              f.write(f"BA_ \"GenMsgNrOfRepetition\" BO_ {MessageID} {MessageNumOfRepetition};\n") if Table.cell_value(i, MessageStartDelayTime_Position) != "":#报文开始延迟时间MessageStartDelayTime = remove_exponent(Decimal(Table.cell_value(i, MessageStartDelayTime_Position)).quantize(Decimal("0")))            f.write(f"BA_ \"GenMsgStartDelayTime\" BO_ {MessageID} {MessageStartDelayTime};\n") if Table.cell_value(i, MessageNM_Position) != "":#报文网络管理MessageNM = Table.cell_value(i, MessageNM_Position)        if MessageNM == "Yes" or MessageNM == "YES":f.write(f"BA_ \"NmMessage\" BO_ {MessageID} 1;\n") else:f.write(f"BA_ \"NmMessage\" BO_ {MessageID} 0;\n")if Table.cell_value(i, MessageCANFDBRS_Position) != "":#报文CANFDBRSMessageCANFDBRS = Table.cell_value(i, MessageCANFDBRS_Position)                                          if MessageCANFDBRS == "Yes" or MessageCANFDBRS == "YES":f.write(f"BA_ \"CANFD_BRS\" BO_ {MessageID} 1;\n") else:f.write(f"BA_ \"CANFD_BRS\" BO_ {MessageID} 0;\n")i = i + 1def Output_MessageComment():#打印报文注释global Table        #表格global RowCount     #行数global OutputFile   #输出文件with open(OutputFile, "a+", encoding="GB2312") as f:#打印报文注释  i = 1 #跳过表头while i < RowCount:#逐行轮询MessageID = int((Table.cell_value(i, MessageID_Position)), 16)# 报文IDMessageComment = Table.cell_value(i, MessageComment_Position)# 报文注释if MessageComment != "":f.write(f"CM_ BO_ {MessageID} \"{MessageComment}\";\n") i = i + 1if __name__ == "__main__" :print(f"Start")#打印的顺序不要乱，不然会打不开文件Read_Base_Infomation()Output_DBC_Head()Output_MessageMappingSignal()Output_SignalComment()Output_MessageComment() Output_DBC_Comment()  Output_SignalAttributes()Output_MessageAttribute()Output_SignalValue()print(f"Success!!")

http://www.shuangfujiaoyu.com/news/1911.html

相关文章：

  • 有什么兼职做设计的网站好合肥网站优化推广方案
  • 网站发帖功能怎么做情感网站seo
  • 哪些公司经常做网站收录网站查询
  • 表单网站怎么做seo长春网站制作
  • 外贸网站怎么做效果好宁波品牌网站推广优化
  • 动态网站建设案例教程网站搜索排名靠前
  • wordpress插件官网郑州网站建设方案优化
  • 深圳品牌女装排行榜前50名seo入门培训学多久
  • 虚拟主机如何分配网站深圳公关公司
  • 真人做a视频网站抖音黑科技引流推广神器
  • php网站开发缓存的运用nba常规赛
  • 可靠的商城网站建设互联网营销师培训
  • 徐州最新情况最新消息今天无线网络优化是做什么的
  • 中山有做网站的公司吗百度灰色关键词排名技术
  • 小学网站怎么做google关键词
  • 做网站服务器和域名南宁seo外包靠谱吗
  • 杭州市建委网站关键词歌词图片
  • 凡科建站代理转让搜索引擎推广的基本方法
  • 东莞虎门服装批发市场优化大师电脑版官方免费下载
  • 专门查企业信息的网站优化方案英语
  • 哪个网络公司做网站好点网站推广平台排行
  • 域名访问网址长沙优化网站厂家
  • 网站开发怎么让别人看到seo基础培训机构
  • 手机大型网站app推广渠道商
  • 百度关键词权重查询潍坊网站seo
  • 用word可以做网站吗米拓建站
  • 国内优秀网站赏析谷歌浏览器入口
  • 建设中的网站备案期间做什网站制作公司怎么样
  • 做网站一般都用什么字体优化师是一份怎样的工作
  • 网页传奇游戏排行站长工具seo排名查询